How Voltaback measures every kWh charged at home
How Voltaback measures every kWh charged at home

Reimbursing home charging at real cost means answering two simple questions: how many kWh did the car charge at home, and what does one kWh cost this employee? Voltaback answers both with software, with no connected charger, no smart cable and no telematics box. This page explains where the data comes from, how it is checked, and what the Bureau Veritas audit does and does not prove.
How the data flows, from the car to the monthly statement
1. The driver connects the car. In the Voltaback app, the driver links the car's manufacturer account, with their consent. 48 manufacturers are supported. It takes less than 2 minutes.
2. Voltaback reads the charging sessions. For each session, the manufacturer data gives the energy charged, the date and the duration. Location is used only to recognise a session at home. It is never shared with the employer.
3. Voltaback relies on the home meter. The household's electricity meter is MID-certified, meaning it complies with the European Measuring Instruments Directive. It is the billing reference between the supplier and the employee. Voltaback relies on that meter and adds no measuring device.
4. Voltaback applies the real price per kWh. The tariff comes from the employee's electricity contract, including off-peak, EV or variable tariffs. Charging losses, the energy drawn at the meter that never reaches the battery, are included in the amount reimbursed [À VÉRIFIER: describe how losses are calculated].
5. A monthly statement is produced. For each employee: sessions, kWh, price applied and amount. It exports to payroll and accounting.
Why not add a meter? A connected charger or a smart cable measures at the socket, but each one has to be bought, installed and maintained at every employee's home, then dealt with again when people move house or change car. The household meter is already there, it is certified, and it is already used for billing. Voltaback combines that meter with the data the car already produces and the bill the employee already receives. Nothing is installed, and nothing needs replacing when the employee changes car.
The cross-check against the electricity bill
A single data source is not enough for a reimbursement that payroll, internal audit or a tax inspector may check. Voltaback therefore cross-checks the measured kWh against the electricity bill that the employee uploads in the app.
The cross-check covers three points [À VÉRIFIER: exact list of checks in the product]:
- Price. The tariff applied matches the bill for the right period.
- Volume consistency. The kWh attributed to the car are consistent with the total consumption recorded at the home meter over the same period.
- Account holder and address. The bill matches the home address declared by the employee.
When a gap appears, it is flagged to the fleet manager before the reimbursement is approved. Voltaback provides the evidence; the company decides.
For UK employers, this is what HMRC's actual-cost route requires: the payment must cover the car's electricity only (HMRC EIM23900).
The Bureau Veritas audit, and its limits
Bureau Veritas audited Voltaback's measurement method. The result: a relative error of 1.22% on charged kWh [À VÉRIFIER: audit date, number of vehicles and sessions, reference measurement used].
What the audit shows:
- Under the audit conditions, the method measures charged energy with a 1.22% relative error.
- That accuracy is achieved with no hardware installed at the employee's home.
What it does not show:
- It is not a metrological certification. Voltaback is not a meter and is not MID-certified. The MID-certified device is the household meter.
- Accuracy depends on manufacturer data. If a car fails to report a session, for example after a lost connection, it may be missing. The bill cross-check is there to surface such gaps [À VÉRIFIER: how missing sessions are handled].
- The result applies to the audited scope. A car model outside the sample may show a different gap.
- The audit says nothing about tax. It establishes measurement accuracy, not the tax treatment of the reimbursement, which depends on the country.
ISO 27001 certification, data hosted exclusively in France (EU) and GDPR compliance protect this data. UK transfers are covered by the UK adequacy regulations.
FAQ
Your questions about measurement
No. Voltaback is software. It works with a standard socket, a dedicated socket or an existing charger, connected or not.
From the charging sessions reported by the car manufacturer, related to the home's MID-certified meter and cross-checked against the employee's electricity bill.
Within the scope audited by Bureau Veritas, the relative gap between Voltaback's measurement and the reference measurement is 1.22%. For 100 kWh charged, that is about 1.2 kWh.
No. Location is used only to recognise a home charging session and is never shared with the employer.
The cross-check with the bill and the home meter shows the gap, which is flagged to the fleet manager before approval.
Exclusively in France. Voltaback is ISO 27001 certified and GDPR compliant.